I/F (Lan); Setting The Dhcp - GRAPHTEC CE7000 Series User Manual

9.3

I/F (LAN)

Set the network interface (LAN).
Supplement
When you change the settings of the network, the plotter is reset.
To connect through a network (LAN), it is necessary to set the following items.
•
Set the DHCP
•
Set the IP address
•
Set the subnet mask
•
Set the gateway
•
Display the MAC address

Setting the DHCP

HCP settings depend on the configuration of network equipment and the customer's environment. For details,
please see the equipment manual, or consult the network administrator.
The default setting of DHCP is OFF.
Operation
1
Press the [PAUSE/MENU] key.
MENU screen is displayed.
2
Press the POSITION ( ) key (I/F).
INTERFACE screen (1/3) is displayed.
Supplement
Perform the settings in Normal mode.
9-5