GRAPHTEC CE7000 Series User Manual page 274

Step 5: Cut the printed media.
Using the cutting data saved in the USB memory in Step 4, cut the media prepared in Step 3 with the cutting
plotter.
Operation
5-
1 Load the printed media on the cutting plotter.
MARK TYPE 1
5-
2 Insert the USB memory that saved the file into the USB
memory slot of the cutting plotter.
5-
3 Set the menu of cutting plotter.
5-
4 Press the [PAUSE / MENU] key.
MENU screen is displayed.
5-
5 Press the ( ) key (LINK).
DATA LINK screen (1/2) is displayed.
MARK TYPE 2
13-20
Supplement
For loading media, see "Loading Media (Paper
or Marking Film)".
Supplement
Perform the settings in Normal mode.
Supplement
Confirm that the "Destination" is "USB memory".