Setting The Alarm For Degree Of Wear (Blade Wear Alarm) - GRAPHTEC CE7000 Series User Manual

14.5
Setting the Alarm for Degree of Wear
(BLADE WEAR ALARM)
This function allows to measure the cut distance of pen or cutter blade and use it as a guide to determine when
the cutter blade should be replaced.
BLADE WEAR DETECT ON/OFF, SET BLADE GROUP, ALARM DISTANCE and BLADE WEAR DETECT settings
are required.
Operation
1
Press the [PAUSE/MENU] key.
MENU screen is displayed.
2
Press the [1] key (TOOL).
TOOLS SETTING screen (1/4) is displayed.
3
Press the POSITION ( ) key.
TOOLS SETTING screen (4/4) is displayed.
4
Press the [1] key (BLADE WEAR ALARM SETUP).
BLADE WEAR ALARM SETUP screen is displayed.
Supplement
Perform the settings in Normal mode.
14-7