GRAPHTEC CE7000 Series User Manual page 317

6
Press the [1] key (DONE 1/2) or the [2] key (DONE 2/2).
Message to confirm tool position is displayed.
7
Move the tool carriage to print start position by pressing the
POSITION (
8
Confirm that movable parts of the tool and media can safely
operate and press the [ENTER] key.
Selected page of the CONDITION LIST is printed.
9
It will return to READY status when the printing is completed.
10
Press the [PAUSE/MENU] key.
It will return to default screen.
) keys.
Supplement
Press the [ESC] key (CANCEL CONDITION) to
return to the TEST screen without printing the
list.
Do not place you hand around the moving
areas. The tool carriage will start moving, so
there is a chance of injury.
Supplement
Load the media and repeat steps 6 to 8 to print
different page at this point.
15-17
CAUTION