Mounting The Stock Shafts - GRAPHTEC CE7000 Series User Manual

Cutting plotter

Table of Contents

Mounting the stock shafts

Mounting (CE7000-60)

Set one stopper in the stock shaft.

(Keep the stopper screws slightly loose.)

Put the side with the gear on the left side of the machine

(looking from the back) and then slide the stock shaft into the

media stocker.

Slide the media stocker in so that it is bookended by the gear

and the fixed stopper. Make sure the stock shaft touches the

Change the insertion position of the rear stock shaft

according to the roll diameter of the media you want to use.

Fixed stopper