GRAPHTEC CE7000 Series User Manual page 323

5
Press the [3] key (DATA DUMP).
DATA DUMP start screen is displayed.
6
Confirm that the pen tool is set.
7
Confirm that operation area of tool and media is safe.
8
Press the [1] key (DONE).
9
Send the cutting data.
The received cutting data (command) is output.
10
Turn the power off to stop the printing.
Do not place your hand around the moving
areas. The tool carriage will start moving, so
there is a chance of injury.
Supplement
It will return to TEST screen without printing by
pressing the [ESC] key (CANCEL DATA DUMP).
Supplement
It will keep on printing until the power is turned
off once the printing is started by pressing the [1]
key (DONE).
15-23
CAUTION