GRAPHTEC CE7000 Series User Manual page 226

4
Press the [2] key (PUSH ROLLER SENSOR).
PUSH ROLLER SENSOR screen is displayed.
5
Press the [1] key (ENABLED), the [2] key (INSIDE
DISABLED), or the [3] key (DISABLED).
6
Confirm the setting and press the [ENTER] key (SET).
Setting will be confirmed and it will return to ADVANCE screen (4/4).
7
Press the [PAUSE/MENU] key.
It will return to default screen.
Supplement
If "DISABLED" is selected, push roller detection
is not performed.
It will not generate error even if the inner push
rollers are not on the grit rollers when the
"INSIDE DISABLED" is selected.
Supplement
•
When "DISABLE" has been set, the home
sensor position is not detected, so depending
on the data, a position error could occur.
•
It will return to ADVANCE screen (4/4) without
changing the settings when you press the
[ESC] key (CANCEL).
10-6