After Turning On The Plotter; Machine Caution Label; Notes On The Stand; Notes On The Basket (Option) - GRAPHTEC CE7000 Series User Manual

After Turning on the Plotter

During the course of turning on the plotter, be sure to observe the following precautions. The tool carriage and
loaded media may suddenly move during the cutting operation, immediately afterward and when setting the
plotter's functions. Keep hands, hair, clothing and other objects out of the vicinity of the tool carriage, grit rollers
and loaded media. To prevent operator injury and poor cutting results, be careful not to allow hands, hair, clothing
or other foreign objects to become entangled with the tool carriage or loaded media while theplotter is operating.

Machine Caution Label

The Caution Label is located on the machine. Be sure to observe all the cautions on the label.

Notes on the Stand

Be sure to use only the stand designed for the CE7000 Series with your CE7000 Series plotter. The use of a
different stand may cause a plotter malfunction or bodily injury.

Notes on the basket (option)

Plotting/cutting longer than 2 m may affect the quality if the dedicated basket is not used. Be sure to use the
dedicated basket.
IV