Rear View : Ce7000-130/160 - GRAPHTEC CE7000 Series User Manual

Rear view : CE7000-130/160

This section explains in the CE7000-130.
USB memory dedicated connector
RS-232C interface connector
USB interface connector
Netrwork (LAN) Interface
connector
AC line inlet ............................. Inlet where the power cable is connected.
Push roller hold-down force switching lever
.........................Switches the hold-down force of the push roller to 3 stages of strong, medium
Media stocker ..........................A stock to set roll media in.
Stock shaft ..............................A roller that takes in roll media.
Stopper ....................................Keeps set roll media in place.
Stand ........................................A stand to put the machine on.
USB interface connector .......Used to connect the plotter to the computer with a USB interface cable.
RS-232C interface connector
.........................Used to connect the plotter to the computer with a RS-232C interface cable.
Netrwork (LAN) Interface connector
.........................Used to connect this plotter with a network (LAN) I/F.
USB memory dedicated connector
.........................USB memory dedicated connector.
Accessory case ......................Space for temporary storage of accessories such as cutter blades and cutter
Accessory case
Stopper
Media sensors
Stock shaft
and weak.
It depends on the sales area. For details, please contact the distributor where
you purchased.
plungers.
Push roller hold-down force switching lever
Stopper
Media stocker
1-9
AC line inlet
Stand