GRAPHTEC CE7000 Series User Manual page 287

Step 6: Set up cutting plotter.
Set the data link connection method to receive cutting data from the data link server.
Operation
6-
1 Press the [PAUSE / MENU] key.
MENU screen is displayed.
6-
2 Press the POSITION ( ) key (LINK).
DATA LINK screen (1/2) is displayed.
6-
3 Press the [1] key (DESTINATION).
DESTINATION screen is displayed.
6-
4 Press the [2] key (SERVER (USB)) or the [3] key (SERVER
(LAN)).
* Select the connection method to the personal computer set
in "Step 5: Start data link server".
6-
5 Confirm the setting and press the [ENTER] key (SET).
Setting will be confirmed and it will return to DATA LINK screen (1/2).
6-
6 Press the [PAUSE/MENU] key.
It will return to default screen.
Supplement
Perform the settings in Normal mode.
Supplement
It is not necessary to set the IP address of the
data link server in the cutting plotter.
13-33