Table of Contents
Advertisement
3
Press the [3] key (PAGE LENGTH).
PAGE LENGTH setting screen is displayed.
4
Press the POSITION (▲▼) key and increase or decrease the
setting value.
5
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to MEDIA setting screen (1/2).
6
Press the [MENU] key.
It will return to default screen.
Setting Mirror
There is a function to mirror the cutting by reversing the origin point and coordinate axes.
Set the MIRROR setting on to do mirroring.
Reference
Setting for mirror is maintained even after the power is turned off.
<For rear loading/sheet>
X
Y
MIRROR mode on
MIRROR mode off
Y
X
Supplement
Digits of settings can be changed by pressing
l
POSITION
the [FAST] key.
Setting range is from 20.0 cm to 5000.0 cm.
l
Supplement
It will return to MEDIA setting screen (1/2)
without changing the settings when you press the
POSITION (◄) key (CANCEL).
<For front loading>
4-6
X
MIRROR mode off
MIRROR mode on
X
Advertisement
Table of Contents
Troubleshooting
