GRAPHTEC CE7000 Series User Manual page 134

3
Press the POSITION ( ) key
MEDIA SETTING screen (2/2) is displayed.
4
Press the [3] key (PANEL CUTTING).
PANEL CUTTING screen is displayed.
5
Press the [1] key (OFF).
PANEL CUTTING setting screen is displayed.
6
Press the [1] key (ON) or the [2] key (OFF).
Setting will be confirmed and it will return to the PANEL CUTTING
screen.
7
Press the [2] key (DIVIDE LENGHT).
DIVIDE LENGHT screen is displayed.
8
Press the POSITION (
setting value.
9
Confirm the setting and press the [ENTER] key (SET).
Setting will be confirmed and it will return to the MEDIA SETTING
screen (2/2).
10
Press the [PAUSE/MENU] key.
It will return to default screen.
) keys and increase or decrease the
4-16
Supplement
•
Press the [SLOW] key to select the setting
digits.
•
The partition length can be set from 1.0 to
2000.0 cm.
Supplement
It will return to MEDIA SETTING screen (2/2)
without changing the settings when you press
the [ESC] key (PREVIOUS).