GRAPHTEC CE7000 Series User Manual page 197

4
Press the [1] key (OFF).
AUTO PRE FEED setting screen is displayed.
5
Press the [1] key (ON) or the [2] key (OFF).
AUTO PRE FEED will be selected and it will return to AUTO PRE FEED
screen.
6
Press the [2] key (FEED LENGTH).
FEED LENGTH screen is displayed.
7
Press the POSITION (
the setting value.
8
Confirm the setting and press the [ESC] key (PREVIOUS).
FEED LENGTH is selected and return to AUTO PRE FEED screen.
9
Confirm the setting and press the [ENTER] key.
Setting will be confirmed and it will return to MEDIA SETTING screen
(1/2).
10
Press the [PAUSE/MENU] key.
It will return to default screen.
) keys and increase or decrease
8-5
Supplement
It will return to MEDIA SETTING screen (1/2)
without changing the settings when you press
the [ESC] key (CANCEL).
Supplement
•
Feed length can be set in 0.1 m units.
•
You can set the range between 0.5 m and
50.0 m.
•
Press the [SLOW] key to select the setting
digits.
Supplement
It will return to MEDIA SETTING screen (1/2)
without changing the settings when you press
the [ESC] key (CANCEL).
Supplement
mark is displayed at the right of the screen
when AUTO PRE FEED is set. See "How to Use
Control Panel".