Configuring Camera Presets - Yealink VC800 User Manual

https://arttel.ru/
User Guide for the VC800 Video Conferencing System
Note

Configuring Camera Presets

Storing a Camera Preset
120
https://arttel.ru/shop/videokonferentsii/yealink-vc800-cp960-8way
the remote control or CP960 conference phone. The presentation stops automatically if the PC is
disconnected from the system.
During a voice call, only local display device displays the PC content. During a video call, both
local and remote display devices display PC contents. Only one content can be shared at a time.
A presentation started later will replace the previous one.
To start/stop presentation manually when the system is idle:
If a PC is connected to the VCH50 video conferencing hub, but a presentation does not start
automatically, do one of the following to start or stop a presentation manually:
If is set to Presentation key, press
-
For more information on how to customize the key, refer to
Tap on the CP960 conference phone to start presentation.
-
Tap on the CP960 conference phone to stop presentation.
To start/stop presentation manually during a call:
If a PC is connected to the VCH50 video conferencing hub, but a presentation does not start
automatically, do one of the following to start or stop a presentation manually:
If is set to Presentation key. Press
-
For more information on how to customize the key, refer to
Press or to open Talk Menu.
-
Press or to scroll to Presentation, and then press
presentation.
Tap on the CP960 conference phone to start presentation.
-
Tap on the CP960 conference phone to stop presentation.
You can also start a presentation by changing the video layout. For more information, refer to
Changing Video Layout on page 132.
Camera presets are stored camera pan, tilt, and zoom settings. Presets enable you to quickly
point a camera at pre-defined locations. Presets remain in effect until you change them. Up to
12 presets can be saved.
Camera presets are configurable via the remote control or web user interface.
To store a camera preset during a call:
Press or to open Talk Menu.
1.
to start or stop presentation.
Custom Key Type on page 61.
to start or stop presentation.
Custom Key Type on page 61.
to start or stop