Configuring The Audio Settings; Adjusting The Volume; Configuring Key Tone; Enabling Silent Mode - Yealink MeetingEye 400 User Manual

3. Confirm the action.

Configuring the Audio Settings

Adjusting the Volume

You can adjust the following volume:
Ringer volume: adjust the ringer volume when the phone is idle or ringing.
•
Talking volume: adjust the speakerphone volume when the device is in a call.
•
• Key tone volume: adjust the volume of key tone when you press the key on the remote control
• Media Volume: adjust the media volume when playing recorded videos.
On your remote control, press the Volume key to adjust the volume.

Configuring Key Tone

You can enable the key tone feature. When you press any key on the remote control, the system will
produce a sound.
1. Go to More > Settings > Basic > General.
2. Enable Key Tone.

Enabling Silent Mode

If you enable the silent mode, the speaker of your endpoint makes no sound.
Long press the Vol- key to decrease the volume to the minimum.
Note: When the silent mode is enabled, the

Muting the Microphone

You can mute the local microphone during a call so that other parties cannot hear you.
On your remote control, press the Mute Key.
If the video conferencing system is muted, the icon

Configuring Video Settings

Adjusting the Monitor Display Proportion

If you use the TV as the display device, the TV might not display the entire video image. To solve this
problem, you can adjust the display proportion to display the entire video image as you need.
1. Go to More > Settings > Basic > General > Display.
2. Use left or right key to adjust the Display (90%-100%) slider.
icon will appear on the monitor.
will appear on the local video.
| Configuring the Audio Settings | 53