Set Dial; Set Digit-Handling - Avaya G450 Cli Reference Manual

set dial

Use the set dial command to define the method for sending outbound digits in SLS.
Syntax
set dial dial-type
Parameters
Parameter
dial-type
User Level
read-write
Context
sls > trunk-group
Example
To define the method for sending outbound digits as DTMF:
G450-001 (sls-trunk-group-<200>)# set dial dtmf
Related Commands
add port, clear
cbc-service-feature,
set digit-handling,
japan-disconnect,
supervision, set
trunk-group

set digit-handling

Use the set digit-handling command to define how the inbound/outbound calls handle
the reception/transmission of the dialed pattern in SLS.
Note:
This command only applies to ISDN trunks.
Note:
Description
The method used to send digits toward the
outbound trunk
tac, clear trunk-group,
set channel-preference,
set digit-treatment,
set name, set numbering-format,
tac, set trunk-hunt, set
remove port, set cbc,
set codeset-display,
set incoming-destination,
set send-name,
sls, show (trunk-group),
SLS survivability
Possible
Values
rotary
dtmf
set cbc-parameter, set
set codeset-national,
set incoming-dialtone,
set send-number,
show sls, show trunk-group
Issue 1 January 2008
Default
Value
dtmf
set digits,
set
set
sls,
1047