Set Side - Avaya G450 Cli Reference Manual

CLI Commands
Example
To set the ISDN Layer-3 protocols relative to the country specified by set
country-protocol to option a:
G450-001 (sls-ds1-<port address>)# set protocol-version a
Related Commands
clear ds1, set
country-protocol,
signaling-mode,

set side

Use the set side command to specify the glare-handling conditions when the
command has been administered as peerMaster or peerSlave for the ISDN link in SLS.
Note:
This command is only valid for ISDN.
Note:
Syntax
set side side
Parameters
Parameter
side
User Level
read-write
Context
sls > ds1
sls > bri
Examples
To set the glare-handling conditions to mode a in DS1:
G450-001 (sls-ds1-<port address>)# set side a
To set the glare-handling conditions to mode a in BRI:
G450-001 (sls-bri-<port address>)# set side a
976 Avaya G450 CLI Reference
bearer-capability, set
set interface, set interface-companding,
set sls, show (ds1),
Description
Glare mode
bit-rate, set channel-numbering,
show ds1, show sls,
SLS survivability
set connect,
set long-timer, set name,
sls
Possible
Values
a
b
set
set side, set
set interface
Default
Value
a