Avaya G450 Cli Reference Manual page 936

CLI Commands
Syntax
set side side
Parameters
Parameter
side
User Level
read-write
Context
sls > ds1
sls >bri
Examples
To set the glare-handling conditions to mode a in DS1:
G450-001 (sls-ds1-<port address>)# set side a
To set the glare-handling conditions to mode a in BRI:
G450-001 (sls-bri-<port address>)# set side a
Related DS1 commands
clear ds1, set
country-protocol,
protocol-version,
Related BRI commands
bri, clear bri, set
directory-number-b,
set name, set
936 Avaya G450 CLI Reference
Description
Glare mode
bearer-capability, set
set interface, set interface-companding,
set signaling-mode,
bearer-capability, set
set endpoint-init,
spid-a, set spid-b, set
bit-rate, set channel-numbering,
set sls, show (ds1),
country-protocol, set
set interface, set interface-companding,
sls, set tei-assignment,
SLS survivability
Possible
Values
a
b
set connect,
set long-timer, set name,
show ds1, show sls, sls
directory-number-a,
set
show (bri), show bri,
Default
Value
a
set
set
set
layer1-stable,
show sls, sls