Related Commands
composite-operation, cookie, destination-ip,
policy-based routing, packet
bri
link,
show
list, source-ip,
destination-port,
show ip-rule
Use the show ip-rule command to display the attributes of a specific rule. Leave the
rule_number parameter blank to display all rules.
Syntax
show ip-rule [rule_number]
Parameters
Parameter
rule_number
User Level
read-write
Context
ip access-control-list, ip access-control-list/ip-rule, ip qos-list, ip qos-list/ip-rule, ip capture-list,
ip capture-list/ip-rule, ip pbr-list, ip pbr-list/ip-rule
Example
To display information about ip rule 22 in access-control-list 320:
G450-001(ACL 320/ip rule 22)# show ip-rule 22
I.D.
Protocol IP
----- -------- --- ---------------- --------- ----------
22
Ip
sniffing),
show
tcp
destination-port,
udp
source-port, cos,
Description
The specific rule for which attributes are
displayed
Wildcard
Src
Dst
dscp
(policy), dscp-table, icmp,
composite-operation,
tcp
established,
dscp (policy-based routing, packet sniffing,
Port
Operation
Any
permit
Any
Policy - access control lists
ip-rule (policy,
show
dscp-table,
show isdn
tcp
source-port,
udp
VPN),
Possible
Default
Values
Value
Issue 1 January 2008
name
693