ppp timeout retry
Use the ppp timeout retry command to set the maximum time to wait for a response
during PPP negotiation. Use the no form of the command to restore the timeout value to its
default.
Syntax
[no] ppp timeout retry seconds
Parameters
Parameter
seconds
User Level
read-write
Context
Interface: Console, FastEthernet (PPP L2, PPP L2-L3), Serial (DS1 PPP L2, DS1 PPP L2-L3,
USP PPP L2, USP PPP L2-L3), Dialer (L2, L2-L3), USB-modem
Example
To specify that PPP will wait up to 30 seconds for a response during negotiation:
G450-001(super)# ppp timeout retry 30
Related Commands
encapsulation,
show interfaces
Use the show interfaces command to display interface configuration and statistics for a
particular interface or all interfaces. The Frame Relay sub-interface only includes the following
counters:
packets & bytes in
●
packets & bytes out
●
input errors
●
Description
The authentication timeout in seconds
ip
address,
keepalive
(PPP),
ppp timeout
ncp,
PPP encapsulation
Possible
Default
Values
Value
1-255
2
show interfaces
Issue 1 January 2008
815