Avaya G450 Cli Reference Manual page 1255

Hide thumbs Also See for G450:
Table of Contents

Advertisement

Name
Inbound packets
(Cont)
Outbound
packets
Description
Bad padding * — the number of packets discarded after being
received through this tunnel, because of bad ESP trailer format
received failure
Invalid identity * — the number of packets discarded after being
received through this tunnel, because of invalid identity. That is,
the inner (original) IP header address does not match the IP
subnet configured in the containing crypto-list rule.
Unprotected * — the number of packets discarded after being
received in the clear (unprotected), although they were expected
to arrive protected by this tunnel (that is, unprotected packets with
source and destination IP matching the IP subnet configured in
the containing crypto-list rule)
Other discards * — the number of packets dropped due to other
reasons which were not covered by the above counters
Overall decompression ratio
compression efficiency at the remote peer. This is the ratio
between the number of octets resulting after decompression and
the number of octets received before decompression – for all
packets, including incompressible packets.
Decompression ratio
compression engine at the remote peer. This is the ratio between
the number of octets resulting after decompression and the
number of octets received before decompression, for
compressible packets only.
#*
Uncomp bytes
decompression, including incompressible packets.
#*
Comp bytes
— the total number of bytes received compressed
#*
Incomp bytes
received, that is, that were received uncompressed
The outbound packets statistics for the crypto-list rule:
Total — the total number of outbound packets sent
Total OK — the total number of outbound packets sent and not
discarded
Encrypt — the total number of packets successfully encrypted.
Digest — the total number of packets successfully attached with
an HMAC
Encaps — the total number of packets successfully encapsulated
with an IPSec tunnel header
* This parameter appears when the
#
This parameter appears when IP Payload Compression (IPPCP) is used.
&
The SA table is displayed only when active SAs exist for the rule.
#
— a measure of the total
#*
— a measure of the efficiency of the
— the total number of bytes after
— the total number of incompressible bytes
keyword is specified.
detail
Issue 1 January 2008
VPN
1255

Advertisement

Table of Contents
loading

Table of Contents