Set Spid-A - Avaya G450 Cli Reference Manual

set spid-a

Use the set spid-a command to assign a Service Profile Identifier (SPID) to a North
American BRI trunk in SLS. The trunk circuit cannot be placed in service unless the SPID
initialization is successful.
Note:
This command is valid only for a BRI circuit employed with ISDN.
Note:
Syntax
set spid-a spid-number
Parameters
Parameter
spid-number
User Level
read-write
Context
sls > bri
Example
To assign SPID number 30353810041111 to the B1 channel of a North American BRI trunk:
G450-001(sls-bri <port address>)# set spid-a 30353810041111
Related Commands
bri, clear bri, set
directory-number-b,
set name, set side,
Description
String of 1-14 digits describing the SPID (Service
Profile Identifier) to the circuit
bearer-capability, set
set endpoint-init, set
set spid-b, set sls,
country-protocol, set directory-number-a,
interface, set interface-companding,
set tei-assignment, show
SLS survivability
Possible
Values
0-9
set
set layer1-stable,
bri, show (bri), show sls,
Issue 1 January 2008
Default
Value
sls
937