Sat - Avaya G450 Cli Reference Manual

CLI Commands
Output fields:
Field
Session ID
From
To
At
TTL
HOP ADDRESS
DELAY
Related Commands
rtp-stat clear, rtp-stat
rtp-stat qos-trap-rate-limit, rtp-stat-service,
detailed, show rtp-stat

SAT

sat
Use the sat command to provide a shortcut method to access the System Access Terminal
(SAT) so that Avaya Communication Manager translation work can be performed. See the
description for
port to 5023.
Syntax
sat
920 Avaya G450 CLI Reference
Description
The RTP statistics index for the RTP session
The IP address of the G450
The IP address of the session destination (in this case, a
destination within the specified subnet)
The time the traceroute is performed
The hop count and TTL field value of probe packets
The hop IP address
The round trip time per probe packet. Three probe
packets are sent per hop address, and the displayed
value is the average of the three round-trip times. An
asterisk (*) indicates that the probe packets timed out.
event-threshold,
sessions, show rtp-stat summary
session on page 562 for more information. The server must configure the SAT
rtp-stat fault, rtp-stat min-stat-win,
rtp-stat threshold,
rtp-stat qos-trap,
show rtp-stat config, show rtp-stat
SAT