Set Codeset-Display - Avaya G450 Cli Reference Manual

Related Commands
add port, clear
cbc-service-feature,
digit-handling, set
japan-disconnect,
supervision, set
trunk-group

set codeset-display

Use the set codeset-display command to identify which Q.931 codesets are allowed to
send display information to the user phone in SLS.
Note:
This command only applies to ISDN trunks.
Note:
Syntax
set codeset-display codeset
Parameters
Parameter
codeset
User Level
read-write
Context
sls > trunk-group
Example
To identify that codeset6 is allowed to send display information to the user phone:
G450-001 (sls-trunk-group-<tgnum>)# set codeset-display codeset6
Related Commands
add port, clear
cbc-service-feature,
digit-handling, set
tac, clear trunk-group,
set codeset-display,
digit-treatment, set
set name, set numbering-format,
tac, set trunk-hunt, set
Description
The Q.931 codeset that sends display
information to the user phone
tac, clear trunk-group,
set channel-preference,
digit-treatment, set
remove port, set cbc,
set codeset-national,
incoming-destination,
set send-name,
sls, show (trunk-group),
remove port, set cbc,
set codeset-national,
incoming-destination,
SLS survivability
set cbc-parameter, set
set dial, set digits,
set incoming-dialtone,
set send-number,
show sls, show trunk-group
Possible
Values
codeset0
codeset6
codeset7
set cbc-parameter, set
set dial, set digits,
set incoming-dialtone,
Issue 1 January 2008
set
set
set
sls,
Default
Value
codeset6
set
set
1045