Avaya G450 Cli Reference Manual page 1048

CLI Commands
Syntax
set digit-handling method
Parameters
Parameter
method
User Level
read-write
Context
sls > trunk-group
Example
To define that inbound and outbound calls handle reception and transmission as enbloc and
enbloc respectively:
G450-001 (sls-trunk-group-<tgnum>)# set digit-handling enbloc-enbloc
Related Commands
add port, clear
cbc-service-feature,
set digits, set digit-treatment,
japan-disconnect,
supervision, set
trunk-group
1048 Avaya G450 CLI Reference
Description
How the inbound/outbound calls handle
the reception/transmission of the dialed
pattern.
Enbloc requires sending the entire
collected digit string in one block.
Overlap sends the digits one at a time
as they are collected.
Note: If you specify enbloc for
transmission of outbound calls, the
dialing technique should be ARS.
Note: If you are employing TAC dialing
for a trunk-group, set the transmission
for outbound trunk calls to overlap.
tac, clear trunk-group,
set channel-preference,
set incoming-destination,
set name, set numbering-format,
tac, set trunk-hunt, set
remove port, set cbc,
set codeset-display,
set incoming-dialtone,
set send-name,
sls, show (trunk-group),
SLS survivability
Possible Values Default Value
enbloc-enbloc enbloc-enbloc
enbloc-overlap
overlap-enbloc
overlap-overlap
set cbc-parameter, set
set codeset-national,
set
set send-number,
show sls, show trunk-group, sls,
set dial,
set