Capture Interface - Avaya G450 Cli Reference Manual

CLI Commands
Context
general
Example
To apply filter group 501 to the packet sniffer:
G450-001(super)# capture filter-group 501
Related Commands
capture buffer-mode,
max-frame-size,
capture-list, name,

capture interface

Use the capture interface command to specify the interface on which to run the packet
sniffing service. Use the no form of the command to run packet sniffing on all routing interfaces.
Syntax
capture interface interface_name
no capture interface
Parameters
Parameter
interface_name
User Level
read-write
Context
general
Example
To specify that the packet sniffing service run on interface FastEthernet 10/2:
G450-001(super)# capture interface FastEthernet 10/2
638 Avaya G450 CLI Reference
capture buffer-size,
capture start, capture
show capture, show capture-buffer hex
Description
The name of the interface on which to run
packet sniffing. If the interface name
contains spaces, it must be enclosed in
quotes.
capture interface, capture
stop, capture-service,
Packet sniffing
ipsec, capture
clear capture-buffer, ip
Possible
Values
Default
Value