Set Cbc-Service-Feature - Avaya G450 Cli Reference Manual

set cbc-service-feature

Use the set cbc-service-feature command to specify the type of service or feature being
specified in the Network Services Facility information element (as part of the SETUP message)
that is sent to the network service provider on outgoing calls in SLS.
Note:
This command only applies to ISDN Primary Rate trunks.
Note:
Note:
This command is available only if
Note:
Syntax
set cbc-service-feature type
Parameters
Parameter
type
User Level
read-write
Context
sls > trunk-group
Example
To specify that the scocs service will be specified in the Network Services Facility information
element:
G450-001 (sls-trunk-group-<tgnum>)# set cbc-service-feature scocs
Description
The type of service or feature being
specified in the Network Services
Facility information element.
If you specify scocs service, use the
cbc-parameter command to define the
desired grade of service.
set cbc is set to yes.
Possible Values
Feature types:
●
●
set
Service types:
●
●
●
●
SLS survivability
Default
Value
sdn
operator
sub-operator
sdn
megacom
lds
scocs
Issue 1 January 2008 1043