CLI Commands
Use the not form of this command to specify that the current rule applies to all packets except
those having the specified IP protocol.
Syntax
[not] ip-protocol protocol_name | protocol_number
no ip-protocol
Parameters
Parameter
protocol_name
protocol_number
User Level
read-write
Context
ip access-control-list/ip-rule, ip capture-list/ip-rule, ip pbr-list/ip-rule, ip qos-list/ip-rule,
crypto-list/ip-rule
Note:
The not form of the command is not relevant in the crypto-list/ip-rule context.
Note:
Example
To specify that rule 22 applies to all packets having an IP protocol of ICMP:
G450-001(ACL 330/ip rule 22)# ip-protocol icmp
To specify that rule 22 applies to all packets having any IP protocol except ICMP:
G450-001(ACL 330/ip rule 22)# not ip-protocol icmp
Related Commands
destination-ip,
source-ip,
tcp
Related Commands - VPN
description (ip
icmp,
ip
crypto-list,
crypto-list,
tcp
776 Avaya G450 CLI Reference
Description
Name of the IP protocol to match
Number of the IP protocol to match
dscp (policy-based routing, packet sniffing,
destination-port,
tcp
source-port,
rule), destination-ip,
dscp (policy-based routing, packet sniffing,
ip-rule
(VPN), local-address,
destination-port,
tcp
source-port,
VPN), icmp,
udp
destination-port,
udp source-port
protect crypto
map, source-ip,
udp
destination-port,
Policy-based routing
Possible
Default
Values
Value
1-255
show ip
capture-list,
VPN), fragment,
show ip
udp source-port