Show (Trunk-Group) - Avaya G450 Cli Reference Manual

CLI Commands
User Level
read-write
Context
sls > trunk-group
Example
To specify that the trunk-hunting search proceed in a cyclical fashion:
G450-001 (sls-trunk-group-<tgnum>)# set trunk-hunt cyclical
Related Commands
add port, clear
cbc-service-feature,
set digits, set digit-handling,
set japan-disconnect,
supervision, set

show (trunk-group)

Use the show command to display trunk group administration in SLS for this trunk group.
Syntax
show
User Level
read-write
Context
sls > trunk-group
1062 Avaya G450 CLI Reference
tac, clear trunk-group,
set channel-preference,
set digit-treatment,
set name, set numbering-format,
tac, set sls, show (trunk-group),
remove port, set cbc,
set codeset-display,
set incoming-destination,
set send-name,
show sls, show trunk-group
SLS survivability
set cbc-parameter, set
set codeset-national,
set incoming-dialtone,
set send-number,
sls, trunk-group
set dial,
set