Modem Dial Backup Logging Messages - Avaya G430 Manual

Related topics:
Commands used to activate session logging
Severity levels of the logging session
To activate session logging for modem dial backup functions, type the following commands.
Logging messages will be sent to the terminal screen.
• set logging session condition dialer information
• set logging session condition usb-modem information
• set logging session condition ppp information
Note:
Not all logging messages indicate problems. Some are generated to provide information on
normal working activity of the Dialer interface. For more information on logging configuration,
see System logging
Note:
Syslog and log file logging are also available. See
The set logging commands must include a severity level. All logging messages with the
specified severity and higher are displayed. The following are the available severity levels:
Information: This message is for informational purposes and requires no action on your
part.
Debug: This message provides information that can be useful in debugging certain problems,
but requires no action itself.
Warning: This message indicates a condition requiring user intervention and
troubleshooting.

Modem dial backup logging messages

Dialer Messages
Dialer Messages are messages generated by the Dialer interface.
Administering Avaya G430 Branch Gateway
Commands used to activate session logging
on page 215.
Severity levels of the logging session
on page 271
on page 271
System logging
WAN interfaces
on page 215.
October 2013 271