Master Key Configuration; Key Config-Key Password-Encryption - Avaya G450 Cli Reference Manual

Example
To display filter conditions defined for console messaging:
G450-001(super)# show logging session condition
Logging console: enabled
Logging session severity: warning
Facility
-------------
System
Related Commands
clear logging file,
access-level, set logging server
facility, set logging

Master key configuration

key config-key password-encryption

Use the key config-key password-encryption command to change the default Master
Key of the gateway, used to encrypt gateway secrets in the gateway configuration file.
Note:
For security reasons, it is recommended to define a new Master Key upon
Note:
gateway installation. Otherwise, the default Master Key, common to all gateways,
is used to encrypt gateway secrets.
Note:
Record the phrase you entered in the key config-key
Note:
password-encryption command and keep it in a safe place. If you wish to
copy one gateway's configuration file to another gateway, you must first configure
in the other gateway an identical Master Key (by using the same phrase),
otherwise the copy operation will fail.
Note:
When you define a Master Key, you are prompted to save it by copying the
Note:
running configuration to the start-up configuration using the
startup-config
Severity Override
-----------------------
Critical
clear logging server, set logging
condition,
session, show logging file
command. The Master Key will now be in effect.
file, set logging
set logging server enable |
content, show logging server condition
Master key configuration
server, set logging server
disable, set logging server
copy running-config
Issue 1 January 2008 559