Set Port Vlan-Binding-Mode - Avaya G450 Cli Reference Manual

CLI Commands

set port vlan-binding-mode

Use the set port vlan-binding-mode command to define which VLANs will be bound to
the specified port.
Syntax
set port vlan-binding-mode module/port_list value
Parameters
Parameter
module
port_list
value
User Level
read-write
Context
general
Example
To specify that ports 10/5 to port 10/6 will only support the VLANs manually configured for those
ports:
G450-001# set port vlan-binding-mode 10/5-6 static
Set Port vlan binding method:10/5
Set Port vlan binding method:10/6
1186 Avaya G450 CLI Reference
Description
The module number
The port to bind to VLANs.
You can also specify a range
of ports separated by a
dash, for example, 10/5-6 for
both ETH LAN ports 5-6 on
the front panel.
The type of VLAN binding
Possible Values
static - the port supports
only the VLANs that are
manually configured for
this port
bind-to-configured -
the port supports all the
VLANs configured on
the device
VLAN configuration
Default
Value