Avaya G450 Cli Reference Manual page 1301

Note:
This command is also used for the FastEthernet interface when traffic shaping
Note:
has been configured.
Example
To display the priority queue size in packets:
G450-001(super)# show queueing
Current priority queue configuration:
Interface Name VOIP
Serial 3/1 OFF
Serial 4/1:1 OFF
Current voip fair queue configuration:
Interface Name Total
discard
threshold
Serial 3/1:1 256
Output fields
Field
VOIP
Est. Delay [ms]
Q.1
Q.2
Q.3
Q.4
Total discard
threshold
Flow discard
threshold
Dynamic queues
Est. Delay Q.1(High)
[ms]
OFF 524
OFF 507
Flow discard
threshold
64
Description
Indicates if VoIP queueing is enabled. VoIP queueing is
enabled using the voip-queue command.
If VoIP queueing is enabled, displays the maximum queue
delay for which to estimate the high priority queue size
necessary to meet the queueing delay for a specific VoIP
codec. By default, this is estimated for the G.729 codec and is
20 ms. Can be configured through the voip-queue-delay
command. If VoIP queueing is not enabled, the Est. Delay
column displays OFF.
The size, in packets, of the highest priority queue
The size, in packets, of the second highest priority queue
The size, in packets, of the second lowest priority queue
The size, in packets, of the lowest priority queue
The total buffer credits limit for WFQ. Configurable through
fair-queue-limit command.
Per subqueue buffer credits. Not configurable.
The total number of subqueues. Not configurable.
WFVQ (Weighted Fair VoIP Queueing)
Q.2 Q.3 Q.4(Low)
524 524 524
507 507 507
Dynamic Max voip
Queue delay (ms)
16 20
Issue 1 January 2008
DE Buf
-
507
Priority
queues
1
1 of 2
1301