CLI Commands
Syntax
encapsulation pppoe
no encapsulation
User Level
read-write
Context
interface:FastEthernet
Example
To create a PPPoE interface:
G450-001(if:FastEthernet 10/2)# encapsulation pppoe
Related Commands
mtu,
ppp chap
delay,
pppoe-client persistent
wait-for-ipcp
ip address negotiated
Use the ip address negotiated command to enable obtaining an IP address via PPP/
IPCP negotiation. Use the no form of this command to disable IP address negotiation.
Note:
The ip address negotiated command is intended primarily for PPPoE and
Note:
dialer modem.
Note:
When you release a negotiated IP address using no ip address
Note:
negotiated, any DNS information is removed as well.
Note:
You cannot configure both DHCP address negotiation and PPP/ICMP address
Note:
negotiation on the FastEthernet interface.
Syntax
[no] ip address negotiated
User Level
read-write
820 Avaya G450 CLI Reference
hostname,
ppp chap
password,
max-attempts,
ppp pap
sent-username,
pppoe-client
service-name,
PPPoE (PPP over Ethernet)
pppoe-client persistent
pppoe-client