User Level
read-only
Context
general
Example
To open a connection directly to the Avaya Communication Manager SAT application in the
MGC:
G450-001(super)# session mgc sat
Related Commands
session
SLS survivability
sls
Use the sls command to enter the
data set from the G450 CLI. Type exit to leave the
Several second-level subcontexts within the
context type these commands to enter the respective subcontexts:
sls
station extension class to enter the
●
trunk-group tgnum [group-type] to enter the
●
ds1 port-address to enter the
●
sig-group sgnum to enter the
●
bri port-address to enter the
●
dial-pattern dialed-string to enter the
●
incoming-routing tgnum mode [pattern length] to enter the
●
context
!
Important:
If you issue this command on a G450 with insufficient memory, the sls
Important:
command aborts and entry into the
context. In this context, you can administer the SLS
sls
context.
sls
context help SLS administration. While in the
sls
station
context
ds1
context
sig-group
context
bri
context
dial-pattern
context is denied.
sls
SLS survivability
trunk-group
context
context
incoming-routing
Issue 1 January 2008
921