Suggest-Key - Avaya G450 Cli Reference Manual

Note:
If the remote ISAKMP peer is an Avaya Security Gateway (VSU / SG), you must
Note:
specify the self-identity FQDN using upper-case letters only.
Parameters
Parameter
address
fqdn-str
User Level
read-write
Context
crypto isakmp peer
Example
To set self-identity to the address of the current device:
G450-001(config-peer:149.49.70.1)# self-identity address
Related Commands
description (ISAKMP
mode, isakmp-policy,
crypto isakmp

suggest-key

Use the suggest-key utility command to generate a random string which you can use as a
pre-shared key for IKE. You must use the same key on both peers.
Syntax
suggest-key [key-length] [key-type {alphanumeric | hexadecimal}]
Description
Keyword indicating to set self-identity to
the address of the current device. This is
the default setting
Sets self-identity to the Fully Qualified
Domain Name of the current device
peer), continuous-channel,
keepalive (VPN), keepalive-track, pre-shared-key,
peer, suggest-key
Possible
Values
crypto isakmp peer,
Issue 1 January 2008
VPN
Default
Value
initiate
show
1223