Voip-Queue - Avaya G450 Cli Reference Manual

CLI Commands
Field
Max voip delay [ms]
Priority queues
Related Commands - Priority queueing
priority-queue, queue-limit, voip-queue,
Related Commands - WFVQ
fair-queue-limit, fair-voip-queue, priority-queue,

voip-queue

Use the voip-queue command to select custom queueing for VoIP traffic. By default, VoIP
queueing is off, and Weighted Fair VoIP Queueing (WFVQ) is enabled on all Serial interfaces
and all FastEthernet interfaces for which traffic-shaping is enabled. If you disable custom
queueing by using the no form of the voip-queue command, WFVQ is re-enabled.
Syntax
[no] voip-queue
User Level
read-write
Context
interface:Serial (DS1 PPP L2-L3, DS1 PPP L2, DS1 FR L2, USP FR L2, USP PPP L2,
USP PPP L2-L3), FastEthernet (L2, L2-L3) - when traffic shaping is configured, Dialer (L2,
L2-L3)
Example
To enable VoIP queueing:
G450-001(if:Serial 3/1:1)# voip-queue
Related Commands - Priority queueing
priority-queue, queue-limit,
1302 Avaya G450 CLI Reference
Description
Maximum delay for VoIP bearer
The number of priority queues in the system. Not configurable.
From the user's point of view control and bearer queues are
the same queue.
voip-queue-delay
show
show queueing, voip-queue-delay
WFVQ (Weighted Fair VoIP Queueing)
queue, voip-queue
2 of 2