Name - Avaya G450 Cli Reference Manual

CLI Commands
To specify that composite operation 17 sets the DSCP value of packets to a value other than 55:
G450-001(QoS 440/CompOp 17)# not dscp 55
Related Commands - Policy
composite-operation, destination-ip, icmp,
source-ip, tcp
source-port, cos,

name

Use the name command to assign a name to the specified list or operation. Use the no form of
the command to return the name to the default value.
Syntax
[no] name name
Parameters
Parameter
name
User Level
read-write
Context
dhcp pool, dhcp pool vendor specific, dhcp pool option, ip qos-list, ip qos-list dscp-table, ip
qos-list composite-operation, ip access-control-list, ip next-hop-list, ip capture-list, ip pbr-list, ip
crypto-list.
Example
To specify the name of access control list 330 as Admin13:
G450-001(ACL 330)# name Admin13
722 Avaya G450 CLI Reference
destination-port, tcp established,
name
Description
The name of the list or operation.
Note: If you wish to include spaces in the
description, you must enclose the string in
quotation marks ("").
show composite-operation,
tcp source-port, udp
Possible Values
String of 1-31
characters
Policy - QoS lists
show isdn bri link,
destination-port, udp
Default
Value