Set System Location; Set System Name - Avaya G450 Cli Reference Manual

CLI Commands

set system location

Use the set system location command to set the location information for this media
gateway system.
Syntax
set system location [string]
Parameters
Parameter
string
User Level
read-write
Context
general
Example
To set the location information of the system to tech-support:
G450-001# set system location "tech-support"
*** Set system location ***
system location set
Related Commands
set system contact,

set system name

Use the set system name command to specify the name of the media gateway system.
Note:
Set the name of the media gateway to be consistent with the Name field on the
Note:
Media Gateway administration form in Avaya Communication Manager (add
media-gateway).
1134 Avaya G450 CLI Reference
Description
The location name string should be typed inside
double quotes.
The location is cleared if you leave this field blank.
set system name
System identification
Possible Default
Values Value