Set Expansion-Module; Set Name - Avaya G450 Cli Reference Manual

set expansion-module

Use the set expansion-module command to administer a DCP or IP station for an
expansion module in SLS.
Syntax
set expansion-module {yes | no}
Parameters
Parameter
yes
no
User Level
read-write
Context
sls > station
Example
To allow the station to have an expansion module:
G450-001 (sls-station <extension>)# set expansion-module yes
Related Commands
set cor, set name,
(station), show

set name

Use the set name command to identify the username for a station, a trunk group, a DS1, or
ISDN facility in SLS.
Syntax
set name name
Description
Keyword indicating that this station can have an
expansion module
Keyword indicating that this station cannot have
an expansion module. This is the default value.
set password, set port,
(station), show sls, station,
set sls, set swhook-flash,
sls
SLS survivability
Possible Values Default
Value
set trunk-destination,
Issue 1 January 2008
set type
1023