Set Peer-Group - Avaya G450 Cli Reference Manual

Examples
To attach the peer at IP address 149.49.52.135 to crypto map 1:
G450-001(config-crypto:1)# set peer 149.49.52.135
Related Commands
continuous-channel,
peer-group, show crypto map

set peer-group

Use the set peer-group command to attach a peer-group to a crypto map. Use the no form
of the command to remove the peer-group from the crypto map.
Note:
You can only change the peer-group of a crypto map when the map is inactive.
Note:
Note:
The set peer and set peer-group commands are mutually exclusive. You
Note:
must attach to a given crypto map either a peer or a peer-group, not both.
Syntax
set peer-group peer-group-name
no set peer-group
Parameters
Parameter
peer-group-name
User Level
read-write
Context
crypto map
Examples
To attach the peer group vpn.avaya.com to crypto map 1:
G450-001(config-crypto:1)# set peer-group vpn.avaya.com
crypto map, description (crypto
Description
The name of the peer-group
map), set transform-set,
Possible
Values
Issue 1 January 2008
VPN
set dscp, set
Default
Value
1239