Policy-Based Routing; Ip Next-Hop-List - Avaya G450 Cli Reference Manual

CLI Commands
To display detailed information about all the QoS lists:
G450-001(super)# show ip qos-list all detailed
Index Name
----- ------------------------------- --------------------------
400 Default QoS List
Index Protocol IP
----- -------- --- ---------------- --------------- --------------
Deflt Any
Index Name
----- ------------------------------- --------------------------
440 list #440
Index Protocol IP
----- -------- --- ---------------- --------------- --------------
Deflt Any
Related Commands
ip access-control-list,
pre-classification,
bearer, set qos

Policy-based routing

ip next-hop-list

Use the ip next-hop-list command to enter the context of the specified next hop list. If the
list does not exist, it is created. Use the no form of this command to delete the specified next
hop list.
Syntax
ip next-hop-list next_hop_number
no ip next-hop-list next_hop_number
762 Avaya G450 CLI Reference
Wildcard
Src Any
Dst Any
Wildcard
Src Any
Dst Any
ip access-group,
show ip access-control-list,
bearer, set qos control,
Owner
other
Port
Any
Any
Owner
other
Port
Any
Any
ip policy-list-copy, ip qos-group,
interface fastethernet,
set qos signal, show
Policy-based routing
Operation
Trust-DSCP-CoS
Operation
Trust-DSCP-CoS
ip qos-list,
interface serial,
queue, show voip-parameters
ip simulate,
set qos