Parameters
Parameter
full
half
User Level
read-only
Context
interface:FastEthernet (L2, L2-L3)
Example
To specify full duplex for the FastEthernet interface:
G450-001(super-if:FastEthernet 1.1)# duplex full
Related Commands
interface
FastEthernet, autoneg, keepalive-track,
keepalive-track
Use the keepalive-track command to bind an object tracker to a remote VPN peer or to an
interface, to check whether the remote peer or the interface is up. Use the no form of this
command to disable this mechanism (default setting).
Note:
When configuring VPN, you can use the keepalive-track command instead
Note:
of the keepalive command when the remote peer does not support DPD, or
when you want to monitor servers behind the VPN remote peer.
Note:
You cannot configure both keepalive-track and ip address dhcp (DHCP
Note:
Client) on the WAN FastEthernet interface.
Syntax
keepalive-track track-id
no keepalive-track
Description
Keyword indicating that the interface is set
to full duplex
Keyword indicating that the interface is set
to half duplex
WAN Ethernet port configuration
Possible
Values
speed
(interface),
traffic-shape rate
Issue 1 January 2008
Default
Value
1293