Set Incoming-Destination - Avaya G450 Cli Reference Manual

set incoming-destination

Use the set incoming-destination command to identify an extension to directly receive
an incoming trunk call, for example, an attendant or a voice response/recording system in SLS.
Note:
This command only applies to non-ISDN digital, analog loop-start, and analog
Note:
ground-start trunks.
Syntax
set incoming-destination extension
Parameters
Parameter
extension
* To clear the incoming-destination administration use the set incoming-destination " " command.
User Level
read-write
Context
sls > trunk-group
Example
To identify extension 5381000 to receive an incoming trunk call:
G450-001 (sls-trunk-group-<tgnum>)# set incoming-destination 5381000
Related Commands
add port, clear
cbc-service-feature,
set digits, set digit-handling,
name, set numbering-format,
trunk-hunt, set
Description
The extension to receive an
incoming trunk call, for
example, an attendant or a
voice response/recording
system
tac, clear trunk-group,
set channel-preference,
set digit-treatment,
set send-name,
sls, show (trunk-group),
Possible Values
"0 - 9," string may begin
with "0"
0-13 characters, consistent
with the local dial plan
Any administered SLS
extension
remove port, set cbc,
set codeset-display,
set incoming-dialtone,
set send-number,
show sls, show trunk-group
SLS survivability
Default Value
" " (no station
administered)
set cbc-parameter, set
set codeset-national,
set japan-disconnect,
set supervision, set
sls, trunk-group
Issue 1 January 2008
*
set dial,
set
tac, set
1051