Avaya G450 Cli Reference Manual page 1245

Parameters
Parameter Description
Keyword that specifies the current rule
host
applies to a single host IP address
The destination IP address of the rule
ip
Keyword that specifies the current rule
any
applies to any address
The range of IP addresses of the rule.
ip
wildcard
The zero bits in the wildcard correspond to
bits in the IP address that remain fixed. The
one bits in the wildcard correspond to bits in
the IP address that can vary.
Note: This is the opposite of how bits are
used in a netmask.
User Level
read-write
Context
ip capture-list/ip-rule, ip access-control-list/ip-rule, ip pbr-list/ip-rule, ip qos-list/ip-rule, ip
crypto-list ip-rule
Example
To specify that rule 22 applies to all packets having destination IP address 135.64.104.102:
G450-001(Crypto 901/ip rule 22)# destination-ip host 135.64.104.102
Related Commands - Packet sniffing
dscp (policy-based routing, packet sniffing,
source-ip, tcp destination-port,
Related Commands - Policy-based routing
dscp (policy-based routing, packet sniffing,
next-hop-list, show isdn bri link
Related Commands - Policy
composite-operation,
isdn bri link, source-ip,
destination-port, udp source-port
tcp source-port,
dscp (policy), show dscp-table, icmp,
tcp destination-port,
VPN), icmp, ip-protocol,
udp destination-port,
VPN), next-hop (policy-based
show
tcp established, tcp source-port,
Possible Default
Values Value
show ip capture-list,
udp source-port
routing), show ip
composite-operation,
udp
Issue 1 January 2008
VPN
show
1245