Default-Metric (Ospf); Network (Ospf) - Avaya G450 Cli Reference Manual

CLI Commands

default-metric (OSPF)

Use the default-metric command to set the default metric of redistributed routes for the
OSPF protocol. Use the no form of this command to restore the default value.
Syntax
default-metric default_metric
no default-metric
Parameters
Parameter
default_
metric
User Level
read-write
Context
Router-OSPF
Example
To set the default metric for redistributed routes to 50:
G450-001(router:ospf)# default-metric 50
Related Commands
area, network

network (OSPF)

Use the network command to enable OSPF in this network. Use the no form of this command
to disable OSPF in this network. The default value is disabled.
Syntax
network net_addr [wildcard_mask [area area_id]]
626 Avaya G450 CLI Reference
Description
The default metric of redistributed routes
(OSPF), passive-interface, redistribute (OSPF), timers spf
Possible Default
Values Value
1-65535 20
OSPF