Icmp - Avaya G450 Cli Reference Manual

User Level
read-write
Context
ip qos-list composite-operation, ip capture-list ip-rule, ip pbr-list ip-rule,
ip access-control-list ip-rule, ip qos-list ip-rule, ip crypto-list ip-rule
Example
To apply the rule for non-initial fragments:
G450-001(super-Capture 520/ip rule 15)# fragment
Related Commands - Packet sniffing
dscp (policy-based routing, packet sniffing,
capture-list, source-ip,
source-port
Related Commands - Policy-based routing
dscp (policy-based routing, packet sniffing,
routing), show ip
Related Commands - Policy
composite-operation,
bri link, source-ip,
udp source-port, cos,
Related Commands - VPN
description (ip rule), destination-ip,
crypto-list, ip-protocol,
crypto-list, tcp destination-port,

icmp

Use the icmp command to specify that the current rule applies to a specific type of ICMP
packet.
Use the not form of this command to specify that the rule applies to all packets except those of
the requested ICMP attribute. If the IP protocol is not ICMP, it is set to ICMP.
Use the no form of the command to specify that the current rule applies to any type of ICMP
packet.
tcp destination-port,
next-hop-list, show isdn bri link
dscp (policy), destination-ip, icmp,
tcp destination-port,
name
dscp (policy-based routing, packet sniffing,
ip-rule (VPN), local-address,
tcp source-port,
VPN), destination-ip, icmp, ip-protocol,
tcp source-port, udp
VPN), destination-ip,
show
tcp established, tcp source-port,
protect crypto
udp destination-port,
Packet sniffing
show ip
destination-port, udp
next-hop (policy-based
composite-operation,
udp destination-port,
VPN), icmp,
map, source-ip, show ip
udp source-port
Issue 1 January 2008
show isdn
ip
655