Ip Rip Poison-Reverse; Ip Rip Rip-Version - Avaya G450 Cli Reference Manual

Related Commands
ip distribution access-list,
poison-reverse,
ip protocols

ip rip poison-reverse

Use the ip rip poison-reverse command to enable split-horizon with poison-reverse on
the current interface. Use the no form of this command to disable the poison-reverse
mechanism.
The split-horizon technique prevents information about routes from exiting the router interface
through which the information was received. This prevents routing loops.
Poison-reverse updates explicitly indicate that a network or subnet is unreachable.
Poison-reverse updates are sent to defeat large routing loops.
Syntax
[no] ip rip poison-reverse
User Level
read-write
Context
interface:Serial (DS1 PPP L2-L3, DS1 PPP L3, DS1 FR-SUB L2-L3, DS1 FR-SUB L3,
USP PPP L2-L3, USP PPP L3), FastEthernet (L2-L3, L3, PPP L2-L3, PPP L3), VLAN (L2-L3,
L3), Loopback (L2-L3, L3), Tunnel (L2-L3, L3), Dialer (L2-L3, L3)
Related Commands
ip distribution access-list,
default-route-mode,
show ip protocols

ip rip rip-version

Use the ip rip rip-version command to specify the RIP version running on the interface
basis.
Syntax
ip rip rip-version [1|2]
ip rip authentication
ip rip rip-version, ip rip
ip rip authentication
ip rip rip-version,
key, ip rip authentication
send-receive-mode,
key, ip rip authentication
ip rip send-receive-mode,
mode, ip rip
ip rip split-horizon, router
mode, ip rip
ip rip split-horizon,
Issue 1 January 2008
RIP
rip, show
router rip,
861