Icmp - Avaya G450 Cli Reference Manual

Related Commands - Packet sniffing
composite-operation,
(policy, policy-based routing, packet
Related Commands - Policy
composite-operation, dscp-table, ip-fragments-in, ip-option-in,
routing, packet

icmp

Use the icmp command to specify that the current rule applies to a specific type of ICMP
packet.
Use the not form of this command to specify that the rule applies to all packets except those of
the requested ICMP attribute. If the IP protocol is not ICMP, it is set to ICMP.
Use the no form of the command to specify that the current rule applies to any type of ICMP
packet.
Note:
The icmp command also sets the IP protocol to ICMP.
Note:
Syntax
[not] icmp {name | {icmp_type icmp_code}}
no icmp
Parameters
Parameter
name
icmp_type
icmp_code
User Level
read-write
copy capture-file
sniffing), owner,
sniffing), name, owner,
Description
Specify that the rule
applies to this ICMP name
Specify that the rule
applies to this icmp type
Specify that the rule
applies to this icmp code
ftp, copy capture-file scp,
show ip
show composite-operation,
Possible Values
For an ip-rule: 0-256
For a QoS rule: 0-65535
For an ip-rule: 0-256
For a QoS rule: 0-65535
Policy-based routing
copy capture-file tftp,
capture-list, show upload status
ip-rule (policy, policy-based
show isdn bri link,
Default
Value
Issue 1 January 2008
ip-rule
show list
769