Ppp Chap Password - Avaya G450 Cli Reference Manual

Related Commands
encapsulation pppoe, mtu,
persistent delay,
wait-for-ipcp

ppp chap password

Use the ppp chap password command to set the CHAP password for authentication with a
remote peer.
Note:
This command is not backward-compatible. If you downgrade to version 3.x or
Note:
earlier, you need to reconfigure this command on the gateway.
Note:
This command sets the CHAP secret for cases where the device is a CHAP
Note:
responder, and the console port ppp chap-secret command sets the CHAP
secret for cases where the device is a CHAP initiator.
Syntax
[no] ppp chap password secret
Parameters
Parameter
secret
User Level
read-write
Context
interface:FastEthernet, Dialer (L2, L2-L3)
Example
To set the CHAP password for authentication with a remote peer to 123456:
G450-001(super-if:FastEthernet 10/2)# ppp chap password 123456
ppp chap password,
pppoe-client persistent
Description
The CHAP password
ppp pap sent-username,
max-attempts, pppoe-client
PPPoE (PPP over Ethernet)
pppoe-client
service-name, pppoe-client
Possible Default
Values Value
Issue 1 January 2008 823